55 Commits

Author	SHA1	Message	Date
prenticedavid	2eee05d49c	Untested ADIGITALEU_TEENSY	2018-06-11 23:00:47 +01:00
prenticedavid	70c0947965	simplify SPECIAL delays	2018-06-11 21:28:03 +01:00
prenticedavid	14ad900527	simplify XX_DELAY macros	2018-06-08 20:56:31 +01:00
prenticedavid	9d57cf9d45	target specific OPENSMART defines	2018-06-08 20:39:31 +01:00
prenticedavid	5f1474694c	slower for ILI9488	2018-05-21 11:06:10 +01:00
prenticedavid	19552ad069	faster on Due. 2.11s v 3.84s	2018-05-17 11:09:50 +01:00
prenticedavid	251bacea53	Read delays for ST7789. M4 is still fast for ILI9320	2018-05-15 09:50:39 +01:00
prenticedavid	3af694d2ae	add unthought delays	2018-05-14 23:07:39 +01:00
prenticedavid	2ec09a2355	add F446 to NUCLEO blocks	2018-05-14 23:02:20 +01:00
prenticedavid	36e789e766	add L152, F446	2018-05-14 22:56:32 +01:00
prenticedavid	09263d3b2d	follow shield macro style	2018-04-29 14:01:13 +01:00
prenticedavid	6311e9b17d	adjust delays for F401, F411	2018-04-29 13:59:38 +01:00
prenticedavid	8b2f93ad6c	optional hardware mod to BluePill Adapter	2018-04-28 10:39:50 +01:00
prenticedavid	901ae746b1	new ST Core supports BluePill	2018-04-28 10:33:26 +01:00
prenticedavid	86a066b291	nucleo64 shields	2018-04-22 21:04:56 +01:00
prenticedavid	fdb7de6576	dummp RESET pin for OPENSMART	2018-04-08 15:49:26 +01:00
prenticedavid	3e7f62d69d	rearrange STM32 shield macros	2018-01-27 00:12:01 +00:00
prenticedavid	18c442e727	add NUCLEO_F401RE, NUCLEO_F411RE	2018-01-26 22:02:58 +00:00
prenticedavid	c3f564daa6	optional hardware mod to BluePill Adapter	2018-01-19 20:19:30 +00:00
prenticedavid	257d9fbebd	add driver for mega1284P Bobuino	2017-12-31 21:16:48 +00:00
prenticedavid	de804319f1	add USE_OPENSMART_SHIELD_PINOUT on DUE	2017-12-26 20:36:56 +00:00
prenticedavid	a21759f5d3	disable SPECIAL after merge	2017-12-26 20:09:24 +00:00
prenticedavid	ec831e34e0	add some timings for 240x320 MIPI controller	2017-12-26 15:01:13 +00:00
prenticedavid	9b5e8b9248	alter WriteCmd macro to CD_DATA at the end	2017-12-25 17:08:04 +00:00
prenticedavid	7c69ff2211	BLD always inline	2017-12-25 17:06:54 +00:00
prenticedavid	1b1d7a9521	ST7789 reads ID on Teensy3.2 at 96MHz, fails at 120MHz	2017-10-29 08:56:19 +00:00
prenticedavid	3342a14b4d	ST7789 tests with Xmega	2017-10-29 08:47:36 +00:00
prenticedavid	30297c20db	add (unused) ESP32 port register names	2017-09-18 00:00:59 +01:00
prenticedavid	a7e38ef0aa	add TTGO D1 R32 (ESP32 shield). note you must hard-wire 3 control pins	2017-09-17 11:37:08 +01:00
prenticedavid	437b6c5021	tiny1634 pins	2017-09-09 20:53:40 +01:00
prenticedavid	49ebb18b62	correct Tiny1634 shield pins	2017-09-09 20:48:11 +01:00
prenticedavid	6181b9f071	disable as default	2017-05-23 16:30:29 +01:00
prenticedavid	c7363f5859	change SPI pins on Steve's Adapter	2017-05-23 16:29:17 +01:00
prenticedavid	cd2060098a	rearrange VPORTs on Xmega, add MY_BLUEPILL	2017-04-19 22:20:58 +01:00
prenticedavid	6481d1175c	add NUCLEO-L476 shield	2017-04-19 22:19:38 +01:00
prenticedavid	3d3750e661	add defines for MY_BLUEPILL	2017-04-19 22:16:58 +01:00
prenticedavid	58db867f45	typo on elif	2017-03-31 21:08:01 +01:00
prenticedavid	946c8333d8	add MY_BLUEPILL adapter	2017-03-31 20:50:37 +01:00
prenticedavid	66c49a573d	tidy up STM32F103, conditional GPIO_INIT macro	2017-03-27 16:38:55 +01:00
prenticedavid	44b042ac7e	add pins for ITEADMAPLE	2017-03-27 16:34:21 +01:00
prenticedavid	b6f787c64d	add BluePill	2017-03-23 15:46:37 +00:00
prenticedavid	3b98e86790	add driver for BluePill Shield Adapter	2017-03-22 22:35:26 +00:00
prenticedavid	f38e21f856	CTE on DUE USES_16BIT_BUS	2017-03-22 20:49:29 +00:00
prenticedavid	a650172e6e	add USE_ELECHOUSE_DUE_16BIT_SHIELD	2017-03-01 12:07:36 +00:00
prenticedavid	064d087fcb	slow down L476	2017-02-24 20:36:19 +00:00
prenticedavid	d1c26c7c54	slow down USE_MEGA_8BIT_SHIELD for HX8357-D	2017-02-20 14:53:25 +00:00
prenticedavid	2dc12f5aae	add MBED header	2017-02-18 21:39:02 +00:00
prenticedavid	57aa6da23d	add some MBED targets	2017-02-18 21:38:37 +00:00
prenticedavid	28fc4d2e1b	typos	2017-02-13 09:53:15 +00:00
prenticedavid	0c4bd65475	Add Uno Shield on Teensy 3.5, 3.6. 3.6 needs testing	2017-02-13 09:01:50 +00:00