add conditional ILI9806

This commit is contained in:
prenticedavid
2017-03-27 21:20:16 +01:00
parent ae69805ea9
commit 94a68bdeff

View File

@@ -12,6 +12,7 @@
//#define SUPPORT_8347A //HX8347-A +500 bytes, 0.27s
//#define SUPPORT_8352A //HX8352A +486 bytes, 0.27s
//#define SUPPORT_9326_5420 //ILI9326, SPFD5420 +246 bytes
//#define SUPPORT_9806
#define SUPPORT_B509_7793 //R61509, ST7793 +244 bytes
#define OFFSET_9327 32 //costs about 103 bytes, 0.08s
@@ -245,7 +246,7 @@ uint16_t MCUFRIEND_kbv::readID(void)
return 0xAC11;
ret = readReg32(0xD3); //for ILI9488, 9486, 9340, 9341
msb = ret >> 8;
if (msb == 0x93 || msb == 0x94 || msb == 0x77 || msb == 0x16)
if (msb == 0x93 || msb == 0x94 || msb == 0x98 || msb == 0x77 || msb == 0x16)
return ret; //0x9488, 9486, 9340, 9341, 7796
if (ret == 0x00D3 || ret == 0xD3D3)
return ret; //16-bit write-only bus
@@ -788,7 +789,7 @@ void MCUFRIEND_kbv::invertDisplay(boolean i)
}
#define TFTLCD_DELAY 0xFFFF
#define TFTLCD_DELAY8 0xFF
#define TFTLCD_DELAY8 0x7F
static void init_table(const void *table, int16_t size)
{
uint8_t *p = (uint8_t *) table, dat[24]; //R61526 has GAMMA[22]
@@ -2377,6 +2378,40 @@ case 0x4532: // thanks Leodino
*p16 = 400;
break;
#endif
#ifdef SUPPORT_9806
case 0x9806:
_lcd_capable = AUTO_READINC | MIPI_DCS_REV1 | MV_AXIS | READ_24BITS;
// from ZinggJM
static const uint8_t ILI9806_regValues[] PROGMEM = {
(0xFF), 3, /* EXTC Command Set enable register*/ 0xFF, 0x98, 0x06,
(0xBA), 1, /* SPI Interface Setting*/0xE0,
(0xBC), 21, /* GIP 1*/0x03, 0x0F, 0x63, 0x69, 0x01, 0x01, 0x1B, 0x11, 0x70, 0x73, 0xFF, 0xFF, 0x08, 0x09, 0x05, 0x00, 0xEE, 0xE2, 0x01, 0x00, 0xC1,
(0xBD), 8, /* GIP 2*/0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67,
(0xBE), 9, /* GIP 3*/0x00, 0x22, 0x27, 0x6A, 0xBC, 0xD8, 0x92, 0x22, 0x22,
(0xC7), 1, /* Vcom*/0x1E,
(0xED), 3, /* EN_volt_reg*/0x7F, 0x0F, 0x00,
(0xC0), 3, /* Power Control 1*/0xE3, 0x0B, 0x00,
(0xFC), 1, 0x08,
(0xDF), 6, /* Engineering Setting*/0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
(0xF3), 1, /* DVDD Voltage Setting*/0x74,
(0xB4), 3, /* Display Inversion Control*/0x00, 0x00, 0x00,
(0xF7), 1, /* 480x854*/0x81,
(0xB1), 3, /* Frame Rate*/0x00, 0x10, 0x14,
(0xF1), 3, /* Panel Timing Control*/0x29, 0x8A, 0x07,
(0xF2), 4, /*Panel Timing Control*/0x40, 0xD2, 0x50, 0x28,
(0xC1), 4, /* Power Control 2*/0x17, 0x85, 0x85, 0x20,
(0xE0), 16, 0x00, 0x0C, 0x15, 0x0D, 0x0F, 0x0C, 0x07, 0x05, 0x07, 0x0B, 0x10, 0x10, 0x0D, 0x17, 0x0F, 0x00,
(0xE1), 16, 0x00, 0x0D, 0x15, 0x0E, 0x10, 0x0D, 0x08, 0x06, 0x07, 0x0C, 0x11, 0x11, 0x0E, 0x17, 0x0F, 0x00,
(0x35), 1, /*Tearing Effect ON*/0x00,
};
table8_ads = ILI9806_regValues, table_size = sizeof(ILI9806_regValues);
p16 = (int16_t *) & HEIGHT;
*p16 = 480;
p16 = (int16_t *) & WIDTH;
*p16 = 854;
break;
#endif
}
_lcd_rev = ((_lcd_capable & REV_SCREEN) != 0);
if (table8_ads != NULL) {