diff --git a/examples/diagnose_Touchpins/diagnose_Touchpins.ino b/examples/diagnose_Touchpins/diagnose_Touchpins.ino
new file mode 100644
index 0000000..acdbc3b
--- /dev/null
+++ b/examples/diagnose_Touchpins/diagnose_Touchpins.ino
@@ -0,0 +1,49 @@
+void showpins(int A, int D, int value, const char *msg)
+{
+    Serial.print(msg);
+    Serial.print(" (A" + String(A - A0) + ", D" + String(D) + ") = ");
+    Serial.println(value);
+}
+void setup()
+{
+    int i, j, value, Apins[2], Dpins[2], Values[2], found = 0;
+    Serial.begin(9600);
+    Serial.println("Making all control and bus pins INPUT_PULLUP");
+    Serial.println("Typical 30k Analog pullup with corresponding pin");
+    Serial.println("would read low when digital is written LOW");
+    Serial.println("e.g. reads ~25 for 300R X direction");
+    Serial.println("e.g. reads ~30 for 500R Y direction");
+    Serial.println("");
+    for (i = A0; i < A5; i++) pinMode(i, INPUT_PULLUP);
+    for (i = 2; i < 10; i++) pinMode(i, INPUT_PULLUP);
+    for (i = A0; i < A4; i++) {
+        for (j = 5; j < 10; j++) {
+            pinMode(j, OUTPUT);
+            digitalWrite(j, LOW);
+            value = analogRead(i);   // ignore first reading
+            value = analogRead(i);
+            if (value < 100) {
+                showpins(i, j, value, "Testing :");
+                if (found < 2) {
+                    Apins[found] = i;
+                    Dpins[found] = j;
+                    Values[found] = value;
+                    found++;
+                }
+            }
+            pinMode(j, INPUT_PULLUP);
+        }
+    }
+    if (found == 2) {
+        Serial.println("Diagnosing as:-");
+        for (i = 0; i < 2; i++) {
+            showpins(Apins[i], Dpins[i], Values[i], (Values[i] < Values[!i]) ? "XM,XP: " : "YP,YM: ");
+        }
+    }
+}
+
+void loop()
+{
+    // put your main code here, to run repeatedly:
+
+}